Changelog for firmware v5.0b16, released 2018-11-16:
- ENH Alarms system, possible to limit alarm checking while engine running only
- ENH Alarms system, value edit step size lowered below 1 (down up to 0.01)
- FIX Alarms system, fixed re-arming alarms while Restore.VFIZ was in action
Changelog for firmware v5.0b15, released 2018-11-03:
- FIX OBD for predefined LAM,LAMQ readings restored two significant digits after comma (accidentialy was only one)
- FIX Alarms and Logger entries was not saved correctly
- FIX for OBD DTC description display on Red FIS
- ENH Support for wideband AFR module by AEM Electronics
Changelog for firmware v5.0b14, released 2018-10-13:
- FIX boost pressure reading correctly print alternate unit inHg if selected for vacuum
- FIX pressure reading correctly prints psi(instead of bar) with Red FIS
Changelog for firmware v5.0b12, released 2018-06-24:
- ENH&FIX R32 engine OBD parameter definition (AFR/AFRQ/LAM)
- ENH Oil Temperature for R32 8P & 1J
Changelog for firmware v5.0b11, released 2018-04-03:
- ENH and FIX for OBD reading 2.7BiT EGT2 and cyl. 5&6 Misfire, Knock Voltage, Ignition Retard monitoring
Changelog for firmware v5.0b10, released 2018-03-13:
- ENH startup graphics logo geco/quattro
- ENH alarms uses alternate unit system values for limits (Imperial, etc..)
- FIX alarms entering negative values e.g. -1°C
- FIX startup graphics logo speedup
- FIX external measures PT1000 & PT100 support
- FIX external measure oil pressure filtering
Changelog for firmware v5.0b04, released 2018-02-13:
- FIX 8L optional RNS-E radio cooperation
- FIX 8L startup graphics logo display
- FIX external measure names
- FIX 8L MFA keys handling
Changelog for firmware v5.0b02, released 2018-01-10:
- FIX output with graphics icons
- FIX OBD parameter fixed to q°F despite F in some places
