The VFIZ

The VFIZ is an embedded measurement computer allowing one to monitor the car's health and performance parameters in real time, directly via the Instrument Cluster FIS, without the need of any external equipment. It allows one to read and clear Diagnostic Trouble Codes, or see user configured alarms which inform the driver when some parameter's limits are exceeded.

It fits behind the Instrument Cluster and is not visible. The Installation is easy: two plugs just need to be connected to instrument cluster then tachometer adaptaion channel needs to be configured one time to have navigation or telematic supported.

The VFIZ is enabled by a fast double press activation key. In case of Audi activation key can be left key on Multifunction Steering Wheel (MFSW) or Dial on Navi Panel near handbrake. In case of Volkswagen Reset key on MFA wiper stalk .If you press this button single time the button operates in usual way. It integrates seamlessly with the existing car infotainment.  The use of the  Navigation system, MFSW, Bluetooth module is same as usual.


The  units used are S.I. Unit system or U.S. Unit system. Other units systems are possible on request.

The user interface language is in English, German, French, Polish or Portugal. Other language can be easily added on request.

Features, Standard version:

  • Display Measuring Values Blocks gathered directly from CAN bus or over OBD protocol
  • Both KW1281 and KW2000/2089 supported over k-line and can-bus
  • Reading, decoding and displaying Diagnostic Trouble Codes – DTC
  • Clearing Diagnostic Trouble Codes – DTC
  • Plot user chosen parameter over time
  • Measuring performance e.g. from 0 – 100 km/h, 0 – 96 km/h, 60 – 90km/h, 0 – 200km/h, etc..
  • Alarms – user configurable alarms (display + audio) when a configured parameter limit is     exceeding
  • Welcome message
  • Open Ceremony – Tachometer needles sweep after ignition off
  • Plug & Play install, no factory modification needed, only Instrument Cluster adaptation
  • Seamless integration with car equipment
  • Upgrades through USB connection
  • Standard warranty period to 24 months with free updates


Extended version:

  • support for connecting four additional analogue external sensors:
    • two type K thermocouple for temperature measurment e.g. Exhaust Gas Temperature (EGT), CHT, IAT...
    • two voltage output sensors for Oil Pressure Sensor, Turbo Rotational Speed sensor, additional Boost sensor, etc.
    • there is also optional possibility to configure input to support resistive output sensor like common Oil Pressure sensors
  • integrated relay for configurable driving external circuit to be used in future
  • additional storage memory for  files,  DTC descriptions, additional graphics, logger
  • background logging
  • extended warranty period to 48 months with free updates

 
Customized version - Some customisation are possible / intermediate configuration with combination of features, prices on request, for example:

  • Internal MAP sensor for measuring boost up to 3Bar and intake vacuum to ~0.15Bar (from 22inHg intake vacuum to 45psi of boost)
  • long range bluetooth interface for logging
  • GPS support (fast refresh rate 10Hz)
  • Other features on request, e.g. Valentine 1 support, N75 driver, Methanol content analyzer, extra wideband AFR with specilized integrated circuit.

Payments

  • PayPal or wire transfer
  • 30 days money back quarantee !


Supported vehicles:

  • Audi A4 B7 2005 - 2008 with full color or red/orange FIS
  • Audi A4 B6 2001 - 2005 with full color or red/orange FIS
  • Audi A4 Cabrio (Typ 8H)
  • Audi A3 8L 2000 - 2003 (to 2006 in some contries)
  • Audi A6 C5 (Typ 4B) 2000 - 2004
  • VW Golf 4 (Typ 1J, EU 1998 - 2003, in some conuntries much longer)
  • VW Bora
  • VW Jetta
  • VW Passat B5 i B5 FL
  • VW Sharan (Typ 7M)
  • Skoda Octavia
  • Seat Leon 1
  • Seat Toledo 2
  • Seat Alhambra
fShare
Pin It
FaLang translation system by Faboba